Delem Product Line

Pressbrake Controls - DA-40 Series

Compact dual axis control for conventional press brake

The DA-41 control provides a complete solution for conventional press brake applications for 2 axes. Including the axes control for the press beam and backgauge and flexible I/O configuration, the state of the art electronics offers a versatile solution.

The axes control supports servo control, two-speed AC control as well as unipolar control. Depending on the application you can select either two side positioning as well as single side positioning with spindle fault elimination.

With its bright LCD display a clear and easy control is offered. The numerical programming, having angle and tool parameters, can be done in a direct table overview.

The bend parameters can be selected via a user-friendly cursor manipulation.


  • Bright LCD display
  • Beam stop control
  • Backgauge control
  • Angle programming
  • Tool programming
  • Retract function
  • Up to 100 programs
  • Up to 25 bends per program
  • Panel-based housing
  • Servo control / unipolar / AC two-speed control

Technical Specifications

Programming functions

  • Program number
  • Step number 25 max (sequences)
  • Millimeters / Inches
  • Power-down memorization
  • Machine hour counter
  • Stroke counter


  • Stroke: 0 - 9,999.99 mm
  • Retract: 0 - 9,999.00 mm
  • Correction: 0 - 9,999.00 mm
  • Retract programmable
  • Simultaneous axes movement
  • Manual movement of both axes


  • Panel-based vertical housing
  • Dimensions: 189 x 245 x 44 mm

Programming functions

  • User-friendly programming
  • Numerical program setup
  • Angle programming
  • Tool programming
  • Backgauge positions
  • Retract function
  • Y-opening
  • Y-axis correction
  • Press speed selection
  • Stock counter

Computed functions

  • Y-axis depth computation

Integrated functions

  • Diagnosis mode

Axis control Inputs / Outputs

  • +/- 10V for servo control
  • 2-speed control for AC montors
  • Unipolar control including direction outputs (frequency inverter operation)

Digital Inputs / Outputs

  • Flexible I/O configuration
  • Opto-isolated I/O


  • TTL Encoder interface
  • Max. encoder frequency: 1 MHz
  • 5V or 12V single or differential ended
  • DNC RS-232C, bi-directional


  • Operator selectable dialogue languages
  • Offline software for backup/restore of parameters and programs

Product Configuration


  • LCD display
  • 4.7" monochrome
  • High-quality foil cover with integrated membrane switches
  • Product memory of up to 100 programs
  • Number of program steps: 25
  • Tool library

Available product models

  • DA-41e

Ordering Information

Please call 905-681-1580 to order parts and software. You may also send an email to

« Back to Delem Product Line main page

Control System Innovators Corp.
  1-1233 Northside Road,
Burlington, Ontario L7M 1H7
 •  905-681-1580